When planning our trip to South Dakota to ride the Black Hills BDR-X, we knew we needed good adventure luggage and opted for Shad TR40 Terra Adventure Saddlebags, which are soft bags with a rigid mounting system.

Each TR40 Terra saddlebag has an outer bag made of abrasion-resistant material with reinforced stitching and an inner dry bag, both with roll closures to keep out dust and water. Each side has 32 liters of capacity, holds up to 22 lb, and measures 15.75 x 9.8 x 14.9 inches. One side has an outer fuel/water bottle holder, and the other has a small roll-top accessory bag.

On the back of each saddlebag is a hard plastic mounting plate that is compatible with Shad’s 4P System Mount, which is sold separately and available for a wide range of ADV motorcycles. For Reid’s CFMOTO Ibex 800 T, the 4P mount is $309.99. The only mount Shad offers for Daniel’s Royal Enfield Himalayan is the 3P ($172.99), which has an inverted L-shaped hanger rather than the full loop hanger of the 4P, so the connection with the TR40 backing plate was more flexible, and the bags bounced around a bit more.

Overall, we’ve logged about 3,000 miles on the Ibex 800 T and 1,500 miles on the Himalayan with the TR40 Terra bags, including tough adventure miles on the Black Hills BDR-X. We like the size, shape, and style of the TR40 Terra setup, which keeps gear low and forward on the bike. The 4P mount is sturdy and survived multiple tip-overs. With six Duraflex cam buckles and eight reinforced straps per bag, our gear stayed put and didn’t rattle or slide around. The bag-within-a-bag design and roll-top closures kept water out, even when we used a high-pressure sprayer to clean mud off the bikes after the BDR-X. However, because both bags are black, stuff can get lost in the dark bottom. Also, when the inner dry bag was packed full, it would not slide into or out of the outer bag. 

The Double Locking System locks the bag to the 4P mount and locks the outer straps in place to prevent unwanted access. We appreciated being able to lock the bags to the bike, but having to use a key to lock and unlock the outer straps every time we wanted to open the bags was a hassle. Since convenience was more important than security for us, we bypassed the strap lock by trimming the locking tab for the C-ring. We also modified the top straps to allow more adjustability. The locking mechanism that attaches the bags to the 4P mount got jammed up a couple of times from mud and rocks, so keeping them clean and lubricated is important for regular removal and mounting of the saddlebags.

Priced at $578.99 plus the cost of the 4P System Mount (from $222.99 to $343.99), the Shad TR40 Terra Adventure saddlebags are a good value for durable, secure, waterproof luggage.

See all of Rider‘s luggage reviews here.

The post Shad TR40 Terra Adventure Saddlebags Review | Gear appeared first on Rider Magazine.

Lone Rider, which entered the ADV world with its popular MotoTent that features a vestibule to park your bike, introduced its semi-rigid MotoBags in 2017. Over a period of two years, I tested the latest evolution on my KTM 1190 Adventure R with the MotoBags mounted to a set of Touratech luggage racks. 

MotoBags combine a hard pannier’s carrying capacity with a soft bag’s flexibility. This design is advantageous if a crash occurs – something that has happened to me numerous times while tackling single-track terrain on my big KTM. 

In the event of a crash, hard panniers have two major limitations. First, big impacts can dent and mishape the panniers, ruining the integrity of the lid’s waterproof seal. Second, the rider’s leg can get caught under the pannier, potentially causing or exacerbating an injury. Soft bags, on the other hand, don’t dent and make for a softer impact point than solid aluminum. 

I’ve tested the MotoBags in asymmetrical sizes (38 liters on the left, 31 liters on the right) to accommodate my KTM’s right-side exhaust. I’ve covered a wide range of terrain, from hardcore off-road trails to long-distance paved highways. And I’ve scraped and banged the bags against hard objects and dropped my KTM a few times, putting them through real-world abuse. 

The 38-liter bag is 9.5 inches wide and the 31-liter bag is 7.9 inches wide. When fully closed, both bags are about 16 inches tall and just over 17 inches from front to back. The MotoBags set weighs 29 lb, which doesn’t include the luggage rack. 

The Lone Rider designers wisely looked to the military for inspiration, including the use of a heavy-duty but smooth fabric called Hypalon, which is used in inflatable boats where a puncture can mean a life lost. The fabric offers excellent abrasion and puncture resistance while remaining waterproof and dustproof. Reinforced stitching and replaceable rubber corners add extra strength. 

Even though I grazed tree branches at speeds over 80 mph and skidded the MotoBags across sharp rocks, they never punctured, and the fabric, once cleaned up, fared well. 

See all of Rider‘s luggage reviews here.

On the outside of each bag is MOLLE webbing for attaching smaller bags or accessories. As I found out, the MOLLE and a set of straps makes it easy to haul firewood or 12-packs from nearby stores to campgrounds. 

Because there is an outer bag and an inner waterproof roll bag made of 500D PVC tarpaulin, accessing gear inside of MotoBags requires more effort than simply opening a hard pannier lid. The outer bag, which is reinforced with inner stiffeners, has drain holes in the bottom, so using the inner bag is essential for keeping the contents dry. 

For short day trips, accessing the inner bag can be a hassle. But having a removable inner bag for overnight trips is a blessing – simply remove it and unpack what’s needed without taking off the outer bag. On extended trips, I pack only the things needed for the campground/hotel in the inner bags and everything else, like tools, extra gloves, and beverages, between the inner and outer bags. 

There is a learning curve with opening and closing the MotoBags. To open one, you must undo the top two main straps, unlock the combination lock (if used), undo the aluminum latch, remove the strap and fold, unfold the top closure, and then open the inner roll bag. To close the bag, do the same in reverse, making sure you squeeze the air out of the inner and outer bags. 

Lone Rider provides a programmable four-number combination lock for each bag. However, when my six-year-old son helped me install the MotoBags, he reset the combination and locked one of the bags. For peace of mind, I use a pair of keyed Master Lock padlocks, with a spare key hidden in my jacket. 

When mounting the MotoBags, patience may be required to line up their attachment points with the luggage rack. When I first mounted them on my Touratech pannier racks, the quick-release mechanism for each bag was very stiff and difficult to actuate, and I had to tilt the bags forward to be able to lock them into place, which was frustrating. But I later learned when mounting them to my Ducati DesertX Outback Motortek racks that the locking mechanism needed to be readjusted, and now they go on and off quicker than any others on both the KTM and the Ducati. 

The Lone Rider MotoBags offer a solid balance between cost and performance, making them an attractive option for those seeking durable, functional, waterproof soft luggage. The 38L/31L setup with the quick attachment and inner bags is available for $1,200. 

The post Lone Rider MotoBags 2-Year Torture Test | Gear Review appeared first on Rider Magazine.

Motorcycles offer many advantages over other methods of transportation. However, one drawback is a lack of storage space. Whether packing for a weekend trip or picking up a few groceries on your way home from work, having a versatile motorcycle luggage system can be a game-changer, and that’s what the Nelson-Rigg Commuter luggage series provides.

See all of Rider‘s luggage reviews here.

The Nelson-Rigg Commuter Tail Bag is a useful piece of gear that allows for quick attachment and removal. It’s made with UltraMax fabric with UV protection and a molded EVA carbon-like panel that helps the bag to hold its shape. It also comes with a waterproof rain cover, internal straps with hook-and-loop fastening, and a mesh pocket under the lid.

Perhaps the most convenient aspect of this particular bit of motorcycle luggage is how easy it is to attach and remove from a bike. The bag comes with four straps and four attachment points. It can be secured on the bike in two ways, either by removing the passenger seat and looping the straps under the seat before replacing it or by fixing the straps to solid points on the bike. The bag also comes with a shoulder strap that can be looped through a D-ring to convert the bag into a backpack.

The Nelson-Rigg Commuter Tail Bag comes in three sizes: Lite (11.7 liters, 15.3 liters expanded, $119.95), Sport (16.4 liters, 22.3 liters expanded, $129.95), and Touring (24.8 liters, 33.0 liters expanded, $159.95).

The Nelson-Rigg Commuter Tank Bag is constructed of the same materials as the Commuter Tail Bag, and it includes a waterproof rain cover and a clear map/phone pocket.

Like the Tail Bag, the Tank Bag attaches to most motorcycles, either by straps or magnets. The magnet system is easiest to use, since all that’s required is untucking the magnets from the nonslip bottom and sticking them to a metal tank. To use the strap system, loop one strap around the neck of the bike and attach the two ends to buckles on the bag, then loop a second strap through a solid point under the seat and attach the ends to the other two buckles.

The Commuter Tank Bag comes in two sizes: Lite (5.8 liters, 8.4 liters expanded, $119.95) and Sport (10 liters, 14.5 liters expanded, $139.95).

I appreciate the versatility and ease of attachment and removal that the Nelson-Rigg Commuter motorcycle luggage provides. I use the Sport sizes of both bags for weekend trips and daily commutes and find they provide plenty of space for my storage needs. They have proven to be durable, hold their shape well, and can be used on almost any motorcycle. The only downside I’ve encountered is that they would be easy for someone to snatch off my bike since the attachment points are visible and simple to undo, so I park where my bike is visible during lunch stops and remove the bags when I’m done riding for the day.

The post Nelson-Rigg Commuter Motorcycle Luggage: Tail Bag and Tank Bag | Gear Review appeared first on Rider Magazine.

Whether commuting to work, picking something up from the store, or bringing essentials on a trip, there are plenty of good reasons for having sportbike luggage. SW-Motech offers tankbags and saddlebags that can fit almost any motorcycle, including my Kawasaki Ninja 400. 

Related: 2018 Kawasaki Ninja 400 ABS | First Ride Review

The Pro City tankbag ($299.95) is made of 1680-denier ballistic nylon with a water-resistant interior coating. The molded, laminated EVA top includes a MOLLE attachment panel, which can be used to secure an optional smartphone drybag ($31.95).

A model-specific Pro tank ring ($37.95), which replaces the OEM ring around the fuel filler, is required. As a novice mechanic, I thought installing the ring was straightforward, requiring about 45 minutes. The tankbag snaps onto the tank ring effortlessly, and a pull-latch releases it (an optional anti-theft lock is $24.95).

The tankbag’s zippers open and close smoothly, and the pull tabs have a thick, rubbery feel. The outside pockets are convenient for holding small items like keys and a wallet. The tankbag is deep and holds a great deal, and it is expandable from 11 to 14 liters.

While the Pro City tankbag is high-quality luggage that fits cleanly and securely thanks to the Pro tank ring, it is a little too tall and long for my Ninja 400’s riding position, pressing into my chest when I lean over the tank to reach the grips. The smaller Pro Micro tankbag (3-5 liters, $184.95) is a better option for the Ninja, while the Pro City is ideal for the more upright seating position of my Kawasaki Versys-X 300. 

Related: Kentucky Motorcycle Ride: Exploring Mammoth Cave and Bowling Green

SW-Motech’s Blaze saddlebags ($499.95) solve the problem of saggy luggage on sportbikes. They use an innovative mounting system with easily detachable support arms that slide into pockets on the soft saddlebags. The saddlebags are clipped in with a buckle on a nylon strap and then fastened together over the pillion seat using a heavy-duty strap secured by Velcro.

It took about 45 minutes to install the mounts, and the bags are easy to put on. SW-Motech recommends installing the bags while empty and ensuring that the Velcro strap is in place before attaching the bags to the mounting arms to avoid bending or breaking the arms.

The semi-rigid saddlebags are made of 1680-denier ballistic nylon and include waterproof inner bags. They open lengthwise on the top, are easy to fill, and have the same luxurious zippers as the tankbag. Each bag is expandable to hold 15-20 liters and has a zippered outer pocket.

Overall, I was impressed with the quality of both the Pro City tankbag and the Blaze saddlebags. From the innovative design to the sturdy materials, zippers, and seams, these bags seem like they will last a lifetime. They add useful carrying capacity to a sportbike in a way that doesn’t clash with the styling. Now my bike carries nicer bags than I do!

See all of Rider‘s luggage reviews here.

The post SW-Motech Pro and Blaze Sportbike Luggage | Gear Review appeared first on Rider Magazine.

In Rider’s February issue, we shared the results of a survey that offered a fascinating deep dive into our readers’ habits and preferences. One telling statistic was that three-quarters of our readers – yep, we’re looking at you – ride their motorcycles at least 3,000 miles per year, with nearly half of those polled saying they travel at least double that. Along these lines, the top three most popular types of motorcycles our readers own are touring, sport-touring, and adventure bikes. Ergo, we created this motorcycle luggage buyers guide.

With the riding season kicking into high gear, many of you are thinking about your next motorcycle trip. Maybe it will be on paved roads, or maybe you’ll be tackling rougher terrain. Regardless, if you’re already planning your next overnight – or longer – excursion, or even if you’re fortunate enough to be able to drop everything at the last minute and take off for a weekend getaway, how much you can pack and how you will carry it is an important consideration.

With that in mind, this luggage buyers guide provides a variety of great options, from tank bags to panniers to top boxes, to help you take what you need on your next adventure.

See all of Rider‘s luggage reviews here.

Aerostich Tank Panniers

The Aerostich Tank Panniers are semi-rigid bags made in the U.S. and constructed of sturdy, water-resistant urethane-coated 1000-denier Cordura nylon with an adjustable mounting system: two padded, 2-inch-wide hook-and-loop closed webbing straps plus two adjustable bungee shock cords. Neoprene tank pads protect your paint and eliminate slippage, and removable plastic inserts shape the bags. The panniers also feature two exterior pockets. Available in Black or Hi-Viz for $197. Standard: 12 × 9 × 5 in./8.8 liters each, or Competition: 12 × 7.5 × 4.5 in./6.6 liters each.

Cortech Super 2.0 12L Tank Bag

The Cortech Super 2.0 12L Tank Bag is made of 1680-denier ballistic polyester and 1800-denier three-lined twill jacquard. It fits most modern sportbikes and sport-tourers with sloped gas tanks, and it has a single zipper on the main compartment, a removable map pocket, and two built-in sip tube/headphone exit ports. The bag also comes with a rain cover, a shield pouch, a water bladder holder, and hideaway backpack straps. The 12-liter tankbag measures 20 x 7.5 x 11 inches and is priced at $109.99 (strap mount) or $129.99 (magnet mount).

Shad TR40 Terra Adventure Saddlebags

Made of abrasion-resistant material with reinforced stitches, Shad TR40 Terra Adventure Saddlebags have 64 total liters of capacity and hold up to 22 lb in each side, with six Duraflex cam buckles and eight reinforced tiedowns per bag. The Double Locking System locks the bag to the 4P System Side Case Racks (sold separately) and prevents unwanted access to the inside of the bag, while roll closures on the outer and inner bags ensure they’re waterproof. The TR40s include a dry bag, a bag holder, and a bottle harness, and each bag is 15.75 x 9.8 x 14.9 inches. Priced at $578.99. 

Givi ALA44 Monokey Alaska Case

The 44-liter Monokey Alaska Case from Givi holds the equivalent of one modular helmet and features the Monokey attachment system, which uses a single lock and key to open the case and release it from the plate. Inside is a series of built-in grips, so loads can be secured to both the lid and the bottom of the case. The waterproof case has rivets fitted with gaskets and sealed using silicone. It measures 13 x 16.6 x 18.3 inches and has four belt-strap loops integrated into the lid. Available in natural or black finish for $464.

Nelson-Rigg Hurricane Dual Sport Saddlebags

The Nelson-Rigg Hurricane Dual Sport Saddlebags are made from heavy duty, UV-treated PVC tarpaulin material. All seams are electronically heat welded. Approximately 14 liters per side, the saddlebags have internal support panels and a removable stiffener to hold the shape when empty. They mount using hook-and-loop straps and tension buckles – no rack needed. They feature quick-release buckles on top and bottom to secure additional gear and an air purge valve for easy compression. Main compartment measures 17 x 7 x 9 inches. Priced at $179.95 with a lifetime warranty.

Joe Rocket Manta II XL Tank Bag

The Joe Rocket Manta II XL Tank Bag is made of improved structural foam and UltraMax fabric with SBS zippers and is resistant to wind, water, and fading. The newly resized phone pocket has mesh backing for better breathability, and an outer side pocket provides additional access to the main pocket. Inside the tankbag is an adjustable divider to keep contents from shifting, as well as a charge cord and headphone port. The bag comes with a rain cover, and it mounts using either magnets or supplied straps. It measures 16 x 10 x 6 inches and is priced at $124.99.

SW-Motech Pro Blaze Saddlebags

Offering an innovative way to mount soft saddlebags on sportbikes, the SW-Motech Pro Blaze Saddlebags feature mounting arms that quickly attach and detach, leaving minimally visible mounting brackets when the arms are removed. The Pro Blaze bags are made of durable, UV-resistant 1680-denier ballistic nylon material, and the expanding zipper increases volume from 14 to 21 liters. The main compartment is top loading, and the bags have a zippered outside pocket and a carrying handle. Dimensions are 5.5 x 11.8 x 17.3 inches. Priced at $499.95.

Giant Loop Mototrekk Panniers

Giant Loop’s MotoTrekk Panniers are dry bag-inspired panniers made of welded 500-denier waterproof fabric and a double-reinforced top and bottom. They feature a roll-top closure that keeps contents dry and dirt free. The integrated mounting system enables them to strap to virtually any side luggage racks. Lash loops provide expanded storage capacity, and quick-connect magnetic buckles facilitate easy mounting and removal. Each bag holds 25 liters, measures 12 x 15 x 7 inches, and includes two shoulder straps for backpack-style carrying. Priced at $479.

Sedici 20L Dry Bag Saddlebags

The Sedici 20-liter Dry Bag Saddlebags’ three-fold roll-top closures and dual-layer 500-denier tarpaulin material with sonic HF-welded seams ensure your gear stays dry. A quick-release air valve and quick-release speed buckles on each side facilitate easy packing and unpacking. External MOLLE loops, pockets, and D-rings, plus included accessory mounting straps, provide a variety of options for mounting and adding additional storage. Removable internal support loops help keep the bags in shape. They measure 17 x 11 x 6 inches and are priced at $149.99.

Wolfman Luggage Enduro Tank Bag WP

Wolfman Luggage redesigned its popular Enduro Tank Bag WP for a more usable shape that fits almost every dual-sport and dirtbike. Made of custom 840-denier nylon TPU laminate with waterproof RF-welded seams, the bag is kept in place by a four-point quick-release mounting system that doesn’t interfere with the gas cap or the vent hose. With a 4-liter capacity, the Enduro Tank Bag has a removable clear pocket, a removable waist belt pouch, and a YKK AquaGuard water-repellant main zipper. The bag is 9 x 6 x 5.5 inches (height in the front). Priced at $151.99.

The post Take It With You: Motorcycle Luggage Buyers Guide appeared first on Rider Magazine.

Wolfman Luggage is a family-owned and operated business founded by Eric Hougen, a passionate motorcyclist and the company’s designer. Eric’s son, Quinn, is Wolfman’s COO and head of sales. Based in Colorado, Wolfman’s motorcycle luggage is designed and tested in the United States, and the company has been serving the adventure, dual-sport, and touring community for many years.

Related: Wolfman Dual-Sport Luggage | Gear Review

Lisa Hougen, aka “Mrs. Wolfman,” was recently diagnosed with meningioma brain tumors, and one of the tumors is located on the back of her right eye. Lisa’s surgery is scheduled for late April at the UCLA Health Brain Tumor Center. Wolfman Luggage is holding a benefit sale to raise funds to help defray Mrs. Wolfman’s medical expenses.

This following is a message from Wolfman Luggage: “Among the many hard decisions we are facing is how and when to share this sensitive news. We know that our ADV motorcycle community and loyal Wolfman customers will care. Step up to say prayers/well wishes/send us love and healing thoughts and hopefully buy lots of our WP (welded products) luggage to soften the blow! We are a small family-run business and we thank you immensely for your support! –Eric, Lisa & Quinn”

All too often we take our health for granted, and a major illness can rob us of our personal and financial security. We encourage you to buy some well-designed, well-made Wolfman Luggage and support a family that serves our motorcycling community with excellent products and good customer service.

Wolfman Luggage Benefit Sale details:

• 20-45% off Wolfman’s WP line.
• Reduced pricing is on the Wolfman Luggage website, no discount code needed.
• Not valid with other discounts.
• Threadworks and PACK are not included
• Free shipping for orders of $150.00+, continental U.S. only.
• All sales are final
• While supplies last.

The post Wolfman Luggage Benefit Sale appeared first on Rider Magazine.

Unlike taking a roadtrip in a car, where you can pack everything but the kitchen sink, traveling by motorcycle requires you to be more selective about what you bring. And whatever is on your “can’t leave home without it” list, you need a way to carry it on the bike. SW-Motech offers a bewildering array of motorcycle luggage in various styles and sizes, along with carriers, racks, and adapters.

These offerings allow for a customizable, modular approach to kitting out your motorcycle, all designed and manufactured with the quality and attention to detail so often attributed to German engineering. SW-Motech also makes all kinds of cool accessories for safety, protection, navigation, and power supply (beware: sitting down with your favorite refreshing beverage and perusing their website will lead to temptation).

Related: New Gear: SW-Motech’s Centerstands

Our 2022 Honda CB500X long-term test bike is an affordable, efficient, light-duty adventure bike that’s perfect for solo touring, but in stock form, it has neither luggage nor a luggage rack. We surfed over to SW-Motech’s U.S. website, entered the year, make, and model into the “My Bike” filter, and clicked the “Luggage” product category.

Related: Motorcycle Camping on a Honda CB500X and Husqvarna Norden 901

First, we wanted a way to carry luggage, so we ordered the Street-Rack ($252.95), a small rear rack with multiple tie-down points that’s made of black PU-coated 5mm aluminum. We only planned to use the Street-Rack as a lashing point and carrier for a tailbag, but SW-Motech also offers a rack extension, tank ring adapters for mounting a PRO tankbag, and a wide range of adapters for various styles and brands of top cases.

Next, we ordered the PRO Side Carrier ($350.95), which is made of black powdercoated 2.5mm steel. Not only is the side carrier compatible with SW-Motech’s own luggage, but adapter kits are also available for use with Givi/Kappa, Hepco & Becker, Krauser, and Shad luggage.

For luggage, we ordered a SysBag WP M (Waterproof, Medium; $249.95) to use as a tailbag and two SysBag WP L (Large; $399.95 each) saddlebags with adapter plates that allow them to be quickly mounted to or removed from the PRO Side Carrier. The SysBag WP L has lashing straps, so if you didn’t want the quick-release adapter plate, the bag alone is $319.95. However, the straps must be threaded through slots in the carrier’s metal plates, so loaded bags would likely move around, especially during off-road riding, which may wear on the straps over time. Given the convenience and added security of the adapter plates, they’re worth the extra money.

Because I was halfway around the world testing the Royal Enfield Super Meteor 650 in India (see my Royal Enfield Super Meteor 650 First Ride review here), our esteemed former EIC and go-to mechanical guru Mark Tuttle was kind enough to tackle the installation in my absence. From his installation notes: “Overall a nice, heavy-duty system that was fairly easy to install with a minimum of fiddling. Took me about two hours, largely because each hanger on the adapter plates must be secured with four @#$%& screws and nuts, or 32 pairs total. SWM should preinstall these. IMHO installing the system is probably best left to the (at least somewhat) mechanically inclined, though the instructions are clear, and it uses high-quality hardware.”

Installation of either the Street-Rack or the PRO Side Carrier requires removing the CB500X’s passenger grab handles, but the side carrier arms can serve as secure handholds for a passenger. Although the instructions call for drilling the rear fender to secure the rear horizontal support arm, Tuttle said it wasn’t necessary; it aligned easily enough with the license plate bracket holes.

A nifty feature of the PRO Side Carrier are Quick-Lock fasteners that allow the carrier to be removed with a quarter turn, leaving behind only minimal attachment points for a clean look. Since the fasteners are immediately behind the loop part of the carrier, securing them with a flathead screwdriver is tricky. However, SW-Motech sells a stainless steel Multitool Key Chain ($11.95) that includes not only a fastener tool for PRO and EVO side carriers but hex keys in five sizes and a bottle opener. If you’re concerned about theft, a Screw Set ($11.95) is available to replace the Quick-Lock fasteners. 

Once the PRO Side Carrier and adapter plates are installed, it’s literally a snap to mount the two SysBag WP Ls to each side – just line up the hangers on the pins, lift the release lever, and pop them right on. The SysBag WP M was laid flat on the passenger seat and Street-Rack, and its straps were used to secure it in place as a tailbag.

The SysBags are made of TPU (thermoplastic polyurethane) with rubber-like EVA (ethylene vinyl acetate) components and thermally welded seams, and they have roll tops made of 210 Ripstop TPU to keep water and dust out. They have reinforced handles, MOLLE patches for attaching accessories, eyelets for cable locks, Velcro fasteners for bundling excess strap lengths, and removable inner pockets. An outer flap covers the roll tops and secures with quick-release buckles, and inside the flap is a zippered pocket. The M bag’s volume is expandable from 17-23 liters, and the L bag’s volume is expandable from 27-40 liters. The L bag also has inner dividers and an easily accessible exterior compartment for stashing raingear, a thermal layer, or other items.

Overall, this is an impressive, high-quality setup that adds up to 103 liters of storage on the Honda CB500X or other motorcycle. One thing to keep in mind, however, is the added weight. The Street-Rack adds 6.2 lb; the SysBag WP L adds 6.4 lb per bag and 3.0 lb per adapter plate, for a total of 18.8 lb; and the SysBag WP M adds 4.2 lb. All in, that’s 29.2 lb before adding any gear.

The total cost of this setup is $1,677.65. Given the quality and versatility, it’s a good investment in a luggage system that will last for years. The only question is, where will you go first? A good place to start is the SW-Motech website.

See all of Rider‘s luggage reviews here.

The post SW-Motech Motorcycle Luggage: Street-Rack, PRO Side Carrier, SysBag WP | Gear Review appeared first on Rider Magazine.

Several years ago, I tested the first generation of Nelson-Rigg’s Hurricane Waterproof Backpack/Tail Pack, which impressed me with its practicality, functionality, and versatility. Nelson-Rigg has redesigned its entire line of Rigg Gear Hurricane waterproof luggage, which also includes saddlebags, duffel bags, and roll bags.

As with the original, version 2.0 of the Backpack/Tail Pack is made of waterproof, UV-resistant, vinyl-coated 24-oz. polyester tarpaulin fabric with electronically heat-welded seams. Rather than the previous 40-liter and 20-liter options, the new bag is available in a single, happy-medium 30-liter size. One of the key updates is the new 4-point Rigg Strap system, which uses a set of adjustable cam-lock straps to secure the bag to a motorcycle seat and/or luggage rack. Once the straps are cinched tight, the bag stays put even during aggressive off-road riding. I gave it a good thrashing while testing the KTM 1290 Super Adventure R, and it passed with flying colors.

RELATED: 2022 KTM 1290 Super Adventure R | Review

The main compartment of the bag has a large top opening that seals shut with a roll-down, dry-bag closure secured with quick-release buckles. A closable purge valve makes it easy to squeeze out excess air when closing the bag, and there’s a sleeve pocket inside that accommodates tablets and laptops up to 15 inches.

Read more of Rider‘s luggage reviews

The outside of the bag has a side pocket with a drawstring closure that holds a water or fuel bottle up to 30 oz. A large panel on the back is covered in MOLLE webbing for attaching other items, and the panel is hinged on the bottom to provide access to the waterproof document pocket on the other side. The panel also conceals a durable mesh pocket that can be used to stash items for quick access or hold an optional hydration bladder ($19.95). Both sides of the bag have rubber carry handles and loops for attaching items or threading the Rigg Straps.

Large, adjustable, contoured backpack straps have a connector strap across the chest for added security. The backpack straps have outer strips of webbing for attaching a GPS locator, a multi-tool pouch, or other quick-grab items, and there are clips on each strap for securing a hydration tube. When using the bag as a tail pack, the backpack straps can be hidden behind the padded, breathable back panel.

The Hurricane 2.0 Waterproof Backpack/Tail Pack is a well-made, durable piece of motorcycle gear that is even more practical, functional, and versatile than before. Covered by a lifetime warranty, it’s a solid value at $169.95.

For more information, visit NelsonRigg.com.

The post Nelson-Rigg Hurricane 2.0 Waterproof Backpack/Tail Pack | Gear Review appeared first on Rider Magazine.

Over the past nine years, I have taken four major cross-country motorcycle trips, all of them covering well over 11,000 miles. (Read about one of them here: “One Ride, 47 National Parks”.) I am always looking for an easier, more efficient packing system to improve storage and accessibility on the bike. After researching various options, I found the Pakit Rak and Bag for my Honda Gold Wing.

My requirements were simple: 1) the bag needed to be waterproof through torrential downpours; 2) it must not affect the handling of the bike; 3) it should be easy to put on and take off; and 4) it must be secure so I can leave the bag unattended. On my most recent 15,000-mile, 75-day trip (“The Great American Deli Schlep” in the December 2021 issue of Rider), the Pakit Rak and Bag checked all four boxes.

Check out more of Rider’s gear reviews

The rack is positioned behind the Gold Wing’s rear tire, just below the trunk, and the rack and bag are narrower than the integrated saddlebags, so it does not create additional wind resistance. The rack is rated for a maximum of 25 pounds, including the bag. The weight limit was never an issue because I store my heavy gear, tools, etc. in the side panniers. The Pakit Rak Bag is my hotel bag, so it holds my clothing, CPAP machine, toiletry kit, and other overnight essentials.

The bag, which measures 21 inches (W) x 12 inches (H) x 11 inches (D), offers 13 gallons (49.2 liters) of storage capacity in the main compartment, which has internal pockets. There’s additional storage in the expandable zippered side pockets, and the bag includes a shoulder strap and a rain cover. When the bag is on the bike, I always use the rain cover to protect it against the elements, dust, dirt, and road grime.

The Pakit Rak can be mounted in two ways: 1) a receiver bracket that attaches directly to the bike’s frame, or 2) a hitch bracket. The hitch brackets are less expensive than the receiver bracket; see the company’s website for pricing based on Gold Wing model/year (GL1200, GL1500, GL1800) and hitch type. For my 2018 Honda Gold Wing, I went with the receiver bracket option ($575). The bracket is made of 18-guage sheet metal and stiffened with tube steel, and the attachment tube is made of 1-x 1-inch structural tube steel. Everything is powdercoated black, and once the hidden frame bracket is installed, you never see it.

The attachment point for the rack is behind the license plate. When the bag is placed on the rack, it can be secured with a metal bar that runs through the bag and locks in place. For the receiver bracket version, a cotter pin secures the rack to the bracket; an optional locking cotter pin provides additional security.

For more information, visit pakitrak.com.

The post Pakit Rak and Bag for Honda Gold Wing | Gear Review appeared first on Rider Magazine.

Whether cruising the pavement or banging along a remote dirt road, tankbags are a rider’s most convenient place for storing frequently used items. Where else could I keep my sunscreen, hat, and snacks so easily at hand? I’ve used several high-capacity bags over the years on various motorcycles, and although appealing for the sheer volume of stuff they hold, I find large bags can also interfere with bike control. This is most noticeable when standing on the pegs while riding off-pavement. The Nelson-Rigg Trails End model, part of its Rigg Gear Adventure line, creates no such problem.

It has a useful 12-liter capacity, and is expandable vertically to 16.5 liters. Securely mounted to my Yamaha Ténéré 700’s tank with four side-release buckles and the requisite straps, it stays put over the roughest ground, yet is easy to partially remove for fueling. The Trails End’s base is slightly tacky to assist in stabilizing it, and there are protective fabric tabs where the straps contact the tank.

Check out more of Rider’s motorcycle gear reviews

Sewn from UltraMax synthetic fabric, which is said to resist fading (as it has for 8 months), the Trails End maintains its tapered, box-like shape, and it features reflective piping all around. The twin zippers are easy to operate and designed to prevent dust entry, and the two narrow side pockets are large enough for my faceshield cleaning kit, a few small tools, and a notebook.

RELATED: 2021 Yamaha Ténéré 700 | Long-Term Ride Review (Part 2)

Perhaps best of all, the left pocket doesn’t sound the 700’s horn with the bars at full lock. Since the bag is narrow, the map pocket can’t accept two folds of an AAA map, requiring some field origami to make one fit. The clear top is touchscreen-friendly and includes an inside pocket with a net to hold a phone, but my phone had to be securely supported from below (as in stuffing a shirt in the bag) for me to use it easily. At the rear of the bag is a weather-resistant power port; from there, a cord can be run into the map pocket.

With the bag in its unexpanded configuration, the extra two-layer body material from the extension crowds the interior a bit without seriously limiting volume. The large hump of my Yamaha’s tank steals space too, so those extra 4.5 liters when the bag is expanded are invaluable for stashing an extra layer or stocking up on Fritos at the last gas stop before camp. This is a handsome, well-built bag, with its only flaw being some imperfect sewing to attach the map pocket net and second power port.

The Nelson-Rigg Trails End Adventure has a lifetime warranty against defects in materials and workmanship, and comes with a tight-fitting rain cover with a clear top and the ability to extend to protect the expanded bag. It sells for just $119.95.

For more information, visit nelsonrigg.com.

The post Nelson-Rigg Trails End Adventure Tank Bag | Gear Review appeared first on Rider Magazine.